Behind the Scenes

1,302 Pounds, 24 Stories Up: Building a Neolith Listening Room

A two-channel listening room we couldn't keep to ourselves

We don't usually share a project before it's finished. We like the big reveal: every cable dressed, every shelf in place, the system dialed in and ready. This one, we couldn't resist.

It's a two-channel listening room high above the water, built around one idea: sit down, press play, and hear the music the way it sounded in the studio. Even in its "messy" state by our standards, it had to be shared.

The sneak peek: speakers placed, McIntosh stack in, shelving and cabling still to come.

Where it started

The great room had the bones: a long feature wall and a seating area about twelve feet back. We put an 85-inch Samsung The Frame TV on that wall, then two very serious speakers on either side of it, angled in toward the listening position, with the electronics on display between them.

The great room before the install, with the original TV on the feature wall and a seating area in front
The room before: the original TV, and no speakers yet.

The gear

Here's the quick rundown of what went into the room.

MartinLogan Neolith

A pair of electrostatic speakers in Ferrari “Rosso Fuoco” red.

McIntosh MC1.25KW

Two 1,250-watt monoblock amplifiers, one for each speaker.

McIntosh C5S7500

A streaming preamplifier, where every source comes together.

McIntosh MT10

A precision turntable for the vinyl collection.

McIntosh MPC1500

A power controller that keeps the whole stack clean and protected.

McIntosh MEN220

Room correction, to make sure it sounds its best in this room.

Samsung The Frame

An 85-inch TV that shows art when the system is resting.

If two-channel audio is new to you, our two-channel audio page and the Dummy’s Guide to Audio series are good places to start. We’re also an authorized MartinLogan dealer.

Up close: leather and phenolic resin

Get close to a Neolith and the details start to show. The bass section is wrapped in leather, and the cabinet is made of phenolic resin, the same dense material used to make cue balls.

That density matters. A rigid, heavy cabinet adds less of its own vibration to the sound, so more of what you hear is the music itself. The leather is just good taste.

Close-up of a MartinLogan Neolith bass section with leather wrap and woofers
Leather and phenolic resin. The resin is the same material as a cue ball.

A finish you don’t see on speakers

Then there's the paint. That's automotive paint over the phenolic resin, which gives the cabinet its density and a deep, glossy shine you don't see on speakers. It's a statement piece, and it looks like it belongs in a showroom.

The gloss Rosso Fuoco red automotive finish on a MartinLogan Neolith speaker
Rosso Fuoco red. Up close, it reads like a show car.

651 pounds. Each.

Everything comes at a cost, and that doesn't always mean money. Sometimes it's paid in sweat. Each Neolith ships in its own crate at 651 pounds, so the pair comes to 1,302 pounds of speaker.

Crate label marked 651 lbsCrate label for a MartinLogan Neolith in Rosso Fuoco red

Twenty-four stories up

The room is on the 24th floor. Getting there meant a truck, a liftgate, a loading dock, ramps, a freight elevator, and a crew that knew exactly where every corner was. And through all of it, one rule: you'd better not scratch that paint.

A Neolith crate coming off the delivery truck on a city streetThe crew setting up the Neolith speakers and McIntosh components in the room
Behind the scenes: from the crate to the 24th floor.
What made it possible

Planning. Ramps. Crates. More planning. Wiring. Even more planning. And the flexibility to adjust when small things change on the day.

Lucky for us, we have the best in the business. A day like this looks easy on video because of the hours that went into it before the truck ever showed up.

A Neolith speaker in its open crate on a plywood ramp in the building garage
Ramps and crates, in the building garage.

Where it stands now

The speakers are placed, the McIntosh stack is glowing, and the room is coming together. Still to come: the custom glass shelving, so all of the workmanship stays visible, the custom-length cabling, and the final setup that dials it all in for the listening position.

McIntosh MC1.25KW amplifiers, preamplifier and MT10 turntable stacked and powered on
The McIntosh stack, powered up.
One last look before the reveal.
Final version coming soon

We can’t wait to show you the finished room

When the glass shelving, cabling and setup are done, we’ll add the finished room right here.

Get the reveal in your inbox

Sign up for our newsletter and we’ll let you know when the finished room drops.

You're on the list. We'll let you know when it drops.

Thinking about a listening room of your own?

Tell us about your project

Ready to Get Started?

Contact us for more information or to schedule a free onsite consultation.